
Risner Ridge Homes for Sale
A single family subdivision in Park City, Utah, platted in 1988, with a homeowners association and a 5,500 square foot limit on structure size.
About Risner Ridge
Risner Ridge is a single family subdivision in Park City, Utah. Park City recognizes two separate subdivisions, Risner Ridge and Risner Ridge No. 2, with separate plats. The original Risner Ridge subdivision plat was approved by the City Council on May 26, 1988, and recorded with Summit County on June 1, 1988. Risner Ridge No. 2 was approved separately by the City Council on March 16, 1989, and recorded on March 21, 1989.
A 2014 City Council packet describes the Risner Ridge subdivisions as located north of the Park Meadows area and in the Residential Development (RD) zoning district. The packet states that the Homeowners Association of Risner Ridge Subdivision petitioned the City Council for approval of the amended plat. Property descriptions for homes refer to lots in the Risner Ridge Subdivision, such as Lot 35, on American Saddler, and property records show a home built in 1991.
The most important rule is the size limit. According to the 2014 packet, Ordinances 90-28 and 04-09 established that the maximum floor area of any structure in the subdivision is 5,500 square feet, excluding a 600 square foot allowance for garages. The 2014 amended plat process added a plat note consistent with those ordinances and addressed the subdivision’s setback notes. A floor area limit caps how large a house or an addition can be, so it affects any buyer who plans to expand a home.
An April 2026 Utah Public Notice announced a proposed amendment to Lot 21 of the Risner Ridge Subdivision. A proposal in a notice is not the same as a recorded change, so the recorded plat is the document to check for a lot.
Because Risner Ridge and Risner Ridge No. 2 are separate subdivisions with separate plats and associations, a buyer should confirm which one a lot belongs to, and should ask for the recorded plat, the covenants, the association’s rules, budget, and reserve information, and confirm parking, pet, and rental rules in writing.
Highlights of Risner Ridge
Two subdivisions: Park City recognizes Risner Ridge and Risner Ridge No. 2 as separate subdivisions.
Original plat: approved on May 26, 1988, and recorded on June 1, 1988.
Risner Ridge No. 2: approved on March 16, 1989, and recorded on March 21, 1989.
Size limit: Ordinances 90-28 and 04-09 set a maximum floor area of 5,500 square feet for any structure, excluding a 600 square foot garage allowance.
Zoning: the 2014 packet places the subdivisions in the Residential Development (RD) zoning district.
Association: the Homeowners Association of Risner Ridge Subdivision petitioned the City Council for the 2014 amended plat.
Lot amendment: a 2026 notice announced a proposed amendment to Lot 21.
Why Choose Risner Ridge?
Risner Ridge may suit buyers who want a single family home in a long-established Park City subdivision with a homeowners association and a clearly written limit on the size of structures.
The floor area limit is the key detail. A maximum of 5,500 square feet, excluding a garage allowance, caps what can be built, so a buyer who plans an addition or a rebuild should confirm the limit and the plat notes for the specific lot.
Because Risner Ridge and Risner Ridge No. 2 have separate plats and associations, a buyer should confirm which subdivision the lot belongs to and which documents apply.
Before making an offer, review the recorded plat and amendments, the covenants and rules, the budget and reserve information, and the condition of the specific home. Confirm parking, pet, and rental rules in writing.
Risner Ridge Homes for Sale
46 photos
$14,995,000
3311 American Saddler DrivePark City
5 bd · 6 ba · 5,987 sq ft
Risner Ridge · Park Meadows · MLS #12603274
Ask Karen about this homeUpdated Aug 17, 2026
The multiple listing information is provided by the Park City MLS, Inc., from a copyrighted compilation of listings. The compilation of listings and each individual listing are © 2022 Park City MLS, Inc. All Rights Reserved. Access to the multiple listing information through this website is made available by the listing broker as a member of the Park City Multiple Listing Service, Inc. Listing data last updated Nov 19, 2026 1:00 pm MST.
Frequently Asked Questions About Risner Ridge
Risner Ridge is a single family subdivision in Park City, Utah. Park City recognizes two separate subdivisions, Risner Ridge and Risner Ridge No. 2. The original plat was approved on May 26, 1988, and recorded on June 1, 1988.
According to a 2014 City Council packet, Ordinances 90-28 and 04-09 established a maximum floor area of 5,500 square feet for any structure in the subdivision, excluding a 600 square foot allowance for garages. Confirm the limit and any plat note for a specific lot with Park City.
They are separate subdivisions with separate plats. Risner Ridge No. 2 was approved on March 16, 1989, and recorded on March 21, 1989. Check the recorded plat to see which one a lot belongs to.
The 2014 packet places the Risner Ridge subdivisions in the Residential Development (RD) zoning district. Zoning can change, so confirm the zoning of a specific lot with Park City.
The 2014 City Council packet states that the Homeowners Association of Risner Ridge Subdivision petitioned the City Council for approval of the amended plat. Ask for the association’s declaration, rules, and budget.
Review the recorded plat and amendments, the floor area limit and plat notes, the covenants and rules, and the association’s budget and reserve information. Also confirm parking, pet, and rental rules in writing.
Explore Risner Ridge with Karen
Karen can help you compare Risner Ridge with other Park Meadows options and understand how a particular home fits your priorities.
